prelude_io_t

typedef struct prelude_io prelude_io_t;

prelude_io_new ()

int                 prelude_io_new                      (prelude_io_t **ret);

Create a new prelude IO object.

prelude_io_destroy ()

void                prelude_io_destroy                  (prelude_io_t *pio);

Destroy the pio object.

prelude_io_set_file_io ()

void                prelude_io_set_file_io              (prelude_io_t *pio,
                                                         FILE *fd);

Setup the pio object to work with file I/O function. The pio object is then associated with fd.

prelude_io_set_tls_io ()

void                prelude_io_set_tls_io               (prelude_io_t *pio,
                                                         void *tls);

Setup the pio object to work with TLS based I/O function. The pio object is then associated with tls.

prelude_io_set_sys_io ()

void                prelude_io_set_sys_io               (prelude_io_t *pio,
                                                         int fd);

Setup the pio object to work with system based I/O function. The pio object is then associated with fd.

prelude_io_set_buffer_io ()

int                 prelude_io_set_buffer_io            (prelude_io_t *pio);

prelude_io_set_fdptr ()

void                prelude_io_set_fdptr                (prelude_io_t *pio,
                                                         void *ptr);

Set an user defined pointer that might be retrieved using prelude_io_get_fdptr().

prelude_io_set_pending_callback ()

void                prelude_io_set_pending_callback     (prelude_io_t *pio,
                                                         ssize_t (pendingprelude_io_t *io) ());

Set an user defined read callback function to be called on prelude_io_pending().

prelude_io_set_read_callback ()

void                prelude_io_set_read_callback        (prelude_io_t *pio,
                                                         ssize_t (readprelude_io_t *io, void *buf, size_t count) ());

Set an user defined read callback function to be called on prelude_io_read().

prelude_io_set_write_callback ()

void                prelude_io_set_write_callback       (prelude_io_t *pio,
                                                         ssize_t (writeprelude_io_t *io, const void *buf, size_t count) ());

Set an user defined write callback function to be called on prelude_io_write().

prelude_io_close ()

int                 prelude_io_close                    (prelude_io_t *pio);

prelude_io_close() closes the file descriptor indentified by pio,

The case where the close() function would be interrupted by a signal is handled internally. So you don't have to check for EINTR.

However, and especially when the underlaying layer is TLS, prelude_io_close() might return error. If this happen, you should continue calling the function until it return zero.

prelude_io_read ()

ssize_t             prelude_io_read                     (prelude_io_t *pio,
                                                         void *buf,
                                                         size_t count);

prelude_io_read() attempts to read up to count bytes from the file descriptor identified by pio into the buffer starting at buf.

If count is zero, prelude_io_read() returns zero and has no other results. If count is greater than SSIZE_MAX, the result is unspecified.

The case where the read function would be interrupted by a signal is handled internally. So you don't have to check for EINTR.

prelude_io_read_wait ()

ssize_t             prelude_io_read_wait                (prelude_io_t *pio,
                                                         void *buf,
                                                         size_t count);

prelude_io_read_wait() attempts to read up to count bytes from the file descriptor identified by pio into the buffer starting at buf.

If count is zero, prelude_io_read() returns zero and has no other results. If count is greater than SSIZE_MAX, the result is unspecified.

The case where the read function would be interrupted by a signal is handled internally. So you don't have to check for EINTR.

prelude_io_read_wait() always return the number of bytes requested. Be carefull that this function is blocking.

prelude_io_read_delimited ()

ssize_t             prelude_io_read_delimited           (prelude_io_t *pio,
                                                         unsigned char **buf);

prelude_io_read_delimited() read message written by prelude_write_delimited(). Theses messages are sents along with the len of the message.

Uppon return the buf argument is updated to point on a newly allocated buffer containing the data read. The count argument is set to the number of bytes the message was containing.

The case where the read function would be interrupted by a signal is handled internally. So you don't have to check for EINTR.

prelude_io_write ()

ssize_t             prelude_io_write                    (prelude_io_t *pio,
                                                         const void *buf,
                                                         size_t count);

prelude_io_write() writes up to count bytes to the file descriptor identified by pio from the buffer starting at buf. POSIX requires that a read() which can be proved to occur after a write() has returned returns the new data. Note that not all file systems are POSIX conforming.

The case where the write() function would be interrupted by a signal is handled internally. So you don't have to check for EINTR.

prelude_io_write_delimited ()

ssize_t             prelude_io_write_delimited          (prelude_io_t *pio,
                                                         const void *buf,
                                                         uint16_t count);

prelude_io_write_delimited() writes up to count bytes to the file descriptor identified by pio from the buffer starting at buf. POSIX requires that a read() which can be proved to occur after a write() has returned returns the new data. Note that not all file systems are POSIX conforming.

prelude_io_write_delimited() also write the len of the data to be sent. which allow prelude_io_read_delimited() to safely know if it got all the data a given write contain.

The case where the write() function would be interrupted by a signal is handled internally. So you don't have to check for EINTR.

prelude_io_forward ()

ssize_t             prelude_io_forward                  (prelude_io_t *dst,
                                                         prelude_io_t *src,
                                                         size_t count);

prelude_io_forward() attempts to transfer up to count bytes from the file descriptor identified by src into the file descriptor identified by dst.

prelude_io_get_fd ()

int                 prelude_io_get_fd                   (prelude_io_t *pio);

prelude_io_get_fdptr ()

void*               prelude_io_get_fdptr                (prelude_io_t *pio);

prelude_io_pending ()

ssize_t             prelude_io_pending                  (prelude_io_t *pio);

prelude_io_pending return the number of bytes waiting to be read on an TLS or socket fd.

prelude_io_is_error_fatal ()

prelude_bool_t      prelude_io_is_error_fatal           (prelude_io_t *pio,
                                                         int error);

Check whether the returned error is fatal, or not.